昌进机械厂专业生产高速吸塑成型机,吸塑一体机,正压一体吸塑机等。

东莞市桥头昌进机械厂

全国服务热线

0769-81025328
13929478757

二手吸塑机

发布时间:2020-09-22 10:13:57   点击量:

文章标题:二手吸塑机
发布时间: 2020-09-22 10:13:57
文章地址:http://changyang188.com/chanpinzhongxin/46.html
联系客服 0769-81025328

1、采用PL C可编程控制及人机界面台湾“台达”10.1寸彩 色触摸屏操作系统。此系统能大大增强各动作流程稳定及反应速度。

2、采用日本“汇川”简易伺服马达拉片,准确、稳定、操作简便。

3、有1000组的记忆功能,能储存产品的生产数据并具有生产定量功能。

4、采用双滑轨推炉式单热炉设计,适合PET容易起雾、发白的材料吸塑。

5、第五代万能模盘和加重自动马达上料功能、超精密马达切片设计。

6、加大式真空罐和真空阀设计,使高难度产品更快速成型,提高产品质量,减少废品率。

7、电炉温控使用60组外置数字显示独立,一控- -稳压调整。每个控制表带独立稳压系统,彻底解决了因电压波动而引起的

产品质量问题(外带快速加热功能)。

8、上、下模加装增压气罐两个(确保连续工作时上、下模气压稳定性)。

9、独立的二次上模预警功能(防止上模对操作人员的伤害)。

10、独立的震模时间控制,以配合产品不变形,保持完美。

1 It adopts PLC programmable control and human-machine interface Taiwan "delta" 10.1 inch color touch screen operating system. This system can greaty

enhance the stability and reaction speed of each action flow.

2. It adopts Japanese "Huichuan" simple servo motor to pull, which is accurate, stable and easy to operate.

3. With 1000 groups of memory function, it can store the production data of products and has the quantitative production function.

4. It adopts the design of double slide track push fumace and single heat fumace, which is suitable for the material with easy fogging and whitening of pet

5. The ffth generation universal die plate and weighting automatic motor feeding function, ultra precision motor chip design.

6. The design of enlarged vaum tank and vauum valve can make the dfcult products more rapid forming, improve the product qualty and reduce the scrap

rate.

7. The eletic fumace temperature control uses 60 groups of extemal digial display independent one control one votage sabiliation adjustment Each control

meter is equipped with an independent votage sabilzing system, which completly solves the product quality problem caused by voltage fuctuation (with fast

heating function).

8. Two pessurized air tanks are added to the upper and lower molds (to ensure the air pressure sability of the upper and lower molds during continuous

operation).

9. Independent secondary upper mold early warning function (to prevent injury to operators).

10. Independent vibration time control, to match the product does not deform, keep perfect


二手吸塑机(图1)

上一篇 : 二手吸塑机   |   下一篇:没有了
微信二维码 东莞市桥头昌进机械厂微信二维码
联系我们

东莞市桥头昌进机械厂
电话:0769-81025328
手机:13929478757
联系地址:广东省东莞市桥头镇李屋水池公路123号
昌进机械厂专业生产伺服高速吸塑机,伺服马达吸塑成型机,高速吸塑机,高速吸塑成型机,线内裁切吸塑一体机,全自动智能吸塑机等

Copyright © 东莞市桥头昌进机械厂版权所有  

备案号: